logo
ブログ
blog details
ホーム > ブログ >
Miteebite Launches No 9 ID Xpansion Clamp for Precision Vertical Machining
イベント
送信
Mr. Sun Shuai
86-023-62818056
今接触

Miteebite Launches No 9 ID Xpansion Clamp for Precision Vertical Machining

2026-10-29
Latest company blogs about Miteebite Launches No 9 ID Xpansion Clamp for Precision Vertical Machining

Mitee-Bite Products Inc., a supplier of precision workholding equipment, has introduced the #9 ID Xpansion fixture, a low-profile device intended for internal-diameter clamping on vertical machining centers and other machine tool applications. According to the company, the fixture is designed to address concentricity and rigidity challenges that arise when a workpiece must be held from its bore rather than its exterior.

A compact fixture for internal-diameter workholding

The #9 ID Xpansion is built for workholding from an internal diameter. Before use, the fixture can be precision-turned to match a specific workpiece, allowing it to fit closely inside the bore. Mitee-Bite says that custom fit can yield concentricity as tight as 0.0005 inch (0.0127 millimeter).

The fixture retains the compact, low-profile format of the ID Xpansion series. Its flange diameter is the same as that of the #8 model, a design choice intended to support accurate installation when fixtures are packed densely on multi-station setups such as Workcube systems or fixture plates.

Positioning in multi-station setups

The shared flange diameter is intended to allow high-density arrangements without sacrificing installation accuracy. Mitee-Bite says this makes the fixture suitable for multi-station machining environments, including Workcube systems and fixture plates.

The standardized flange also permits operators to position and change multiple parts on a vertical machining center with relative speed, according to the company, supporting production efficiency.

Specifications

Parameter Specification
Maximum internal-diameter clamping size 6.89 in (175 mm)
Minimum turnable diameter 1.15 in (29.21 mm)
Concentricity 0.0005 in (0.0127 mm)
Mounting Hex wrench or hydraulic drawbar cylinder

Through-bolt design aims to bolster rigidity

For heavier cutting operations, the #9 ID Xpansion uses a through-screw design. The screw has a tapered head and passes directly through the fixture body to lock into a fixture plate or hydraulic drawbar cylinder.

That direct connection is intended to increase the overall rigidity of the workholding system, reduce vibration during machining and support stable cutting of complex parts, the company says.

Installation and production flexibility

The fixture can be installed with a hex wrench or a hydraulic drawbar cylinder, according to the specifications. It is positioned for both single-part work and higher-volume setups in which several parts are located and exchanged on a vertical machining center.

Frequently Asked Questions

Is the #9 ID Xpansion suitable for all machine tools?
The fixture is mainly intended for vertical machining centers and MC applications. Because it mounts to a fixture plate or hydraulic drawbar cylinder, the machine must have the necessary mounting interface and space.
How is the 0.0005-inch concentricity achieved?
The precision is achieved through on-demand machining. After installation, the fixture is turned to match the internal diameter of the specific workpiece; that customized fit is the key to the stated concentricity.
What should be considered during installation?
The tapered-head screw must pass fully through the fixture and lock into the base to maintain system rigidity. When a hydraulic drawbar cylinder is used in automated production, the hydraulic pressure parameters should be checked against the fixture’s load capacity.
ブログ
blog details
Miteebite Launches No 9 ID Xpansion Clamp for Precision Vertical Machining
2026-10-29
Latest company news about Miteebite Launches No 9 ID Xpansion Clamp for Precision Vertical Machining

Mitee-Bite Products Inc., a supplier of precision workholding equipment, has introduced the #9 ID Xpansion fixture, a low-profile device intended for internal-diameter clamping on vertical machining centers and other machine tool applications. According to the company, the fixture is designed to address concentricity and rigidity challenges that arise when a workpiece must be held from its bore rather than its exterior.

A compact fixture for internal-diameter workholding

The #9 ID Xpansion is built for workholding from an internal diameter. Before use, the fixture can be precision-turned to match a specific workpiece, allowing it to fit closely inside the bore. Mitee-Bite says that custom fit can yield concentricity as tight as 0.0005 inch (0.0127 millimeter).

The fixture retains the compact, low-profile format of the ID Xpansion series. Its flange diameter is the same as that of the #8 model, a design choice intended to support accurate installation when fixtures are packed densely on multi-station setups such as Workcube systems or fixture plates.

Positioning in multi-station setups

The shared flange diameter is intended to allow high-density arrangements without sacrificing installation accuracy. Mitee-Bite says this makes the fixture suitable for multi-station machining environments, including Workcube systems and fixture plates.

The standardized flange also permits operators to position and change multiple parts on a vertical machining center with relative speed, according to the company, supporting production efficiency.

Specifications

Parameter Specification
Maximum internal-diameter clamping size 6.89 in (175 mm)
Minimum turnable diameter 1.15 in (29.21 mm)
Concentricity 0.0005 in (0.0127 mm)
Mounting Hex wrench or hydraulic drawbar cylinder

Through-bolt design aims to bolster rigidity

For heavier cutting operations, the #9 ID Xpansion uses a through-screw design. The screw has a tapered head and passes directly through the fixture body to lock into a fixture plate or hydraulic drawbar cylinder.

That direct connection is intended to increase the overall rigidity of the workholding system, reduce vibration during machining and support stable cutting of complex parts, the company says.

Installation and production flexibility

The fixture can be installed with a hex wrench or a hydraulic drawbar cylinder, according to the specifications. It is positioned for both single-part work and higher-volume setups in which several parts are located and exchanged on a vertical machining center.

Frequently Asked Questions

Is the #9 ID Xpansion suitable for all machine tools?
The fixture is mainly intended for vertical machining centers and MC applications. Because it mounts to a fixture plate or hydraulic drawbar cylinder, the machine must have the necessary mounting interface and space.
How is the 0.0005-inch concentricity achieved?
The precision is achieved through on-demand machining. After installation, the fixture is turned to match the internal diameter of the specific workpiece; that customized fit is the key to the stated concentricity.
What should be considered during installation?
The tapered-head screw must pass fully through the fixture and lock into the base to maintain system rigidity. When a hydraulic drawbar cylinder is used in automated production, the hydraulic pressure parameters should be checked against the fixture’s load capacity.